Advanced 2 ft Face Width, Hot-dip Galvanized (Base Section), Tower Section for Areas with Strong Winds

Product Manufactured Under ISO 9000 Standards

This tower section must be placed first when assembling a guyed tower of 90 cm wide. 
This component doesn't include nipple or coupling and allows a correct installation.

• Its lightweight structure enables your desired product to be raised up to 30 ft high.

• The product gets a dimensional revision. This means that each one of our tower sections is pre ensemble to ensure the compatibility with its bolt, coupling, nipples, etc.

• Our product is hot-dip galvanized to ensure excellent protection in humid regions, coastal regions, or moderate corrosion environments.

• You don’t have to worry about compatibility problems. A model of the tower section bought with us a year ago will be perfectly compatible with the same model bought today, facilitating the union of sections (consult with an installation expert for older pieces)


Physical Characteristics:

•  Maximum load: 17674 lbs (800 Kg).
• Maximum height: 30 ft
• Wind resistance: 125 mph (200 Km/hr).
• Material: Industrial tube 1.66" (AWG 30). zig-zag: 1/2".
• Nipple: 15.75 in (40 cm).
• Side width: 2 ft (60 cm).
• Weight: 105.27 lbs (47.75 Kg).
• Dimensions: 10 feet long.
• Anti-corrosive protection: Hot-dip galvanized.
• Application: Exterior (humid areas).

Recommendations:

• Ensure that the installation is performed by a trained professional, consult with a professional when mounting equipment in the tower.
• Set up a maintenance plan for review of tensions retained and adjusting screws.
• Don't install solar panels over 19 ft. Check for compatibility between solar panels and mountings.
• The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending in orange-red (SYSCOM does not do the painting work of the tower).

*The declared weight is only for the product it does not take into consideration accessories or packaging.*



Recommendation for height and subjection.

Cable Guide Installation for Tower.

FOR QUESTIONS OR COMMENTS CONTACT THE ENGINEERING DEPT.